Martel Electronics BetaGauge 3II User Manual
Page 81
Advertising
Advanced Display Modes
5-14
5.
The display screen individually prompts you for the
following values:
expected signal value for the high end of the
field instrument’s output scale
expected signal value for the low end of the
field instrument’s input scale
expected signal value for the high end of the
field instrument’s input scale
Repeat step 4 to enter values for each of the above
prompts.
6.
After you have specified all of the values in step 5,
the display screen will return to the main
linearization screen. At this point, you can do one
of the following:
Press the opposite channel select key and
program another linearization mode for the
remaining module.
Press the CLR key to return to the Setup
menu.
Advertising