Martel Electronics BetaGauge 3II - Manual (Page 37)

Basic Operations 3-2
Selecting a Channel for Specific
Functions
Some functions, such as zeroing a module or setting a
damping feature, require that you specify a channel
prior to performing the function.
NOTE: All sample displays representing the LCD in
this guide are depicted with a 0 to 30 PSI
gauge pressure module and/or a DC module.
Procedure
To select a channel for a specific function, press either
the CH 1 or CH 2 key on the keypad. The selected
channel appears in the lower right corner of the LCD
display. A sample display is shown below: