Martel Electronics BetaGauge 3II - Manual (Page 57)

User Preferences 4-2
Programming and Viewing Calibrator
Information
The BetaGauge II allows you to enter the owner’s name
(or other identification) into the calibrator’s non-
volatile memory. You can then view this identification,
as well as the following information, upon demand:
 Serial number of the calibrator
 Calibrator’s last factory acceptance date
Entering Owner Identification
To program the owner’s name (or other identification)
into the calibrator’s non-volatile memory, do the
following:
1. Press the Menu key repeatedly until the Calib
menu appears.
2. Press the function key corresponding to the
displayed menu item Info.
3. Press the function key corresponding to the menu
item Prty to display the Property of: screen. A
sample is shown below:
4. Use the CLR key to erase the character to the left
of the cursor and use the arrow keys on the keypad
to scroll through the available character set. When
the desired character is displayed, press the
ENTER key to accept the character and move the
cursor to the right. A maximum of 20 characters
may be entered for identification.
NOTE: Pressing the ENTER key twice in a row
ends editing. Therefore, to specify the same
character consecutively, use the up and down arrow
keys to select the second character.
Property Of:
MARTEL