Martel Electronics BetaGauge 3II - Manual (Page 88)

6-3 Application Notes
Calibration Tests
You can perform many different calibration tests using
the BetaGauge II. These tests are listed below:
 Electrical to Pressure
 Pressure to Electrical
 Electrical to Electrical (SYS mode using manual
data entry only)
 Pressure to Pressure
 Temperature to Electrical (SYS mode using manual
data entry only)
 Electrical Indicator (or Loops)
 Pressure Indicator (or Loops)
 Temperature Indicator (or Loops)
(SYS mode using manual data entry only)
NOTE: For documentation purposes, you can use
manual entries for a field instrument’s input
and output values while operating in SYS
mode.