Martel Electronics BetaGauge 3II - Manual (Page 151)

Doc. Cal. Mode 7-10
4. To return to the Tag Status screen, press the CLR
key.
NOTE: You can exit the SYS mode by pressing the
CLR key again.
Accessing the Back Screen Level
To access the Back Screen level of the SYS mode,
press the function key corresponding to → on the Tag
Status screen. A sample Back screen display is shown
below:
Back Screen Description
The Back screen is exactly like the Tag Status screen
except for the menu items that appear at the bottom of
the screen. These menu items are described on the
following page.
Tag 1:
BG2 TAGS Tag 1
Inst. OUT: mA
Inst. IN: PSI
Status: UNCAL
Time: 00:00:00
Date: 00/00/00
Error Tol: 0.0500
Alert Tol: 999999
Next: As Found
Tag Status
Exe Reset →