NORD Drivesystems BU0180 - Manual (Page 163)

9 Additional Information
BU 0180 GB-0914 Pre-series version 163
Overview of the standards, which according to product standard EN 61800-3 are applicable as testing and
measuring methods for electric drives whose speed can be altered:
Emission of interference
Emission from cables
(interference voltage)
EN 55011
C1 (only if mounted on motor)
otherwise C2
Radiated emissions
(Interference field strength)
EN 55011
C1 (only if mounted on motor)
otherwise C2
Interference immunity EN 61000-6-1, EN 61000-6-2
ESD, discharge of static electricity EN 61000-4-2 6 kV (CD), 8 kV (AD)
EMF, high frequency electro-magnetic
fields
EN 61000-4-3 10 V/m; 80 – 1000 MHz
Burst on control cables EN 61000-4-4 1 kV
Burst on mains and motor cables EN 61000-4-4 2 kV
Surge (phase-phase / phase-ground) EN 61000-4-5 1 kV / 2kV
Cable-led interference due to high
frequency fields
EN 61000-4-6 10 V, 0.15 – 80 MHz
Voltage fluctuations and drops EN 61000-2-1 +10%, -15%; 90%
Voltage asymmetries and frequency
changes
EN 61000-2-4 3%; 2%
Wiring recommendations for mounting near to motor
M
3 ~
PE
L
1
W
V
U
W
V
U
110-120V
200-240V
380-480V
50-60Hz
L
1
L
2
PE
L
2
/N
L
3 L
3
PE
B- B+
SK 1x0E
EMC screw connector
Brake resistor
(Accessories)