NORD Drivesystems BU0180 - Manual (Page 41)

2 Assembly and installation
BU 0180 GB-0914 Pre-series version 41
2.9.2 Plug connectors for control connection
Various M12 round plug connectors are available as flanged plugs or flanged sockets. The plug connectors
are intended for installation in the housing box of the frequency inverter and can be oriented as required.
The protection class (IP67) of the plug connector only applies in the screwed state. The cover caps
correspond to the colour version as does the plastic body of the plug connector.
System
components
Description Data
System bus
SK TIE4-M12-SYSS
Part. No. 275274506
M12 flanged plug
to connect the incoming system bus cable
A-coded, 5-pin
PIN 1 n. c.
PIN 2 +24V (brown)
PIN 3 GND (blue)
PIN 4 Sys-H (black)
PIN 5 Sys-L (green)
Plastic body in light blue
SK TIE4-M12-SYSM
Part. No. 275274505
M12 flanged plug
to connect the outgoing system bus cable
A-coded, 5-pin
PIN 1 n. c.
PIN 2 +24V (brown)
PIN 3 GND (blue)
PIN 4 Sys-H (black)
PIN 5 Sys-L (green)
Plastic body in light blue
External voltage supply
SK TIE4-M12-POW
Part. No. 275274507
M12 flanged plug
to connect a 24V- supply
A-coded, 4-pin
PIN 1 +24V (brown)
PIN 2 n. c.
PIN 3 GND (blue)
PIN 4 n. c.
PIN 5 n. c.
Plastic body in black
Sensors and actuators
SK TIE4-M12-INI
Part. No. 275274503
M12 flanged plug
to connect sensors and actuators
A-coded, 4-pin
PIN 1 +24V (brown)
PIN 2 DI or DO (white)
PIN 3 GND (blue)
PIN 4 DI or DO (black)
PIN 5 n. c.
Plastic body in black
Analog signal
SK TIE4-M12-ANA
Part. No. 275274508
M12 flanged plug
to connect analog signal encoders
A-coded, 5-pin
PIN 1 +24V (brown)
PIN 2 AIN+ (/AUOT) (white)
PIN 3 GND (blue)
PIN 4 AIN- (black)
PIN 5 10V - REF (red)
Plastic body in white