5 parameters, P746, Module status – NORD Drivesystems BU0060 User Manual
Page 77
Advertising

5 Parameters
BU 0060 GB-4112
77
P746
[-01]
...
[-03]
Module status
(Module status)
SK 7x0E
S
0000 ... FFFF (hex)
Shows the actual status (readiness, error, communication) of
the installed technology unit(s) (if active), but only when own
processor is present, i.e. not for SK TU1-CTR.
Example:
0603
hex
High byte = 06
hex
à Profibus
Low byte = 03
hex
à Module ready + connection to master
Details of the codes specific to the bus can be found in the
section "Error monitoring" of the relevant supplementary
instructions.
[-01] = Technology unit
[-02] = Customer unit
[-03] = Special extension unit
Pos : 137 /Anleit ungen/El ektr oni k/Buss yst eme/ 5. Paramet er/ BUS Paramet er SK 5xxE @ 1\ mod_1336378272615_388.doc x @ 25201 @ 2 @ 1
Advertising