Vaisala HMP240 - Manual (Page 124)

HMP240
Appendix 7: Re-gaining
M210300en
122
3. LED COMMANDS
Re-gaining can be started manually using the LED command ll¡¡ (l = lit,
¡ = dark). Use the up and down press switches (marked with arrows in the
printed board) to find the command code and acknowledge it with the ENT
switch. The re-gaining parameters stored in the transmitter memory are used.
When re-gaining is over the LEDs are dark again.
OPENED COVER OF THE HMP 243
press switches
LEDs
UP
DOWN
ENT
Location of the press switches and LEDs