Vaddio Canon VC-C50i Programmers - Manual (Page 122)

121
13.59 Noise Reduction High Level ON
Camera Control Command Type 2
Function Sets the noise reduction to high level ON.
Command 00B9h
Length 1
byte Parameter
Value 2h
Status None
Reference
Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h B9h 32h EFh
Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Command End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value
Example: e0 e1
In case of No Error :
00000000B ⇒ 00h ⇒ 30h 30h
In case of Parameter Error : 01010000B ⇒ 50h ⇒ 35h 30h
In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
Conditions for setting of error flag
Parameter Error •In case of assigned parameter illegal
Mode Error
•Not in status of Camera ON
•Not in status of Host Control Mode
•Camera is set to Slow Shutter