Vaddio Canon VC-C50i Programmers - Manual (Page 163)

162
14.31 Screen Control System Control Command Type 1
Function To control screen display of date, time, characters.
Command 0091h
Length 2 byte Parameter
Range 00h~09h
Status None
Reference •The following display indication can be set,
Parameter
00h : Display Indication OFF (Screen Display OFF)
01h : Display Indication ON (Screen Display ON)
02h : Character Indication OFF
03h : Character Indication ON
04h : Time Indication OFF
05h : Time Indication ON 1 (Indication Format 1)
06h : Time Indication ON 2 (Indication Format 2)
07h : Date Indication OFF
08h : Date Indication ON 1 (Indication Format 1)
09h : Date Indication ON 2 (Indication Format 2)
•At the moment of power ON, display indication OFF, character indication
ON, time indication ON2, date indication ON2 are set by default.
•By display indication ON/OFF control, all function able to be controlled,
even though each of character indication, time indication, date indication is
set ON/OFF.
•Time Indication Format has two type as under,
Indication Format 1 hh : mm : ss
Indication Format 2 HH : mm : ss AP
hh ⇒ Hour (00~24)
HH ⇒ Hour (00~12)
mm ⇒ Minute (00~59)
ss ⇒ Second (00~59)
AP ⇒ AM or PM
•Date Indication Format has two type as under,
Indication Format 1 yy : mm : dd
Indication Format 2 dd : MM : yy
yy
⇒ Year (00~99)
mm ⇒ Month (01~12)
MM ⇒ Month (JAN, FEB, MAR, APL, MAY, JUN,
JUL, AUG, SEP, OCT, NOV, DEC)
dd ⇒ Date (01~31)
Note:
At the moment of power ON, time indication & date indication start flashing
when display indication sets ON before setting of time & date.