Vaddio Canon VC-C50i Programmers - Manual (Page 86)

85
13.26 Exposure Manual
Camera Control Command Type 1
Function To change to exposure manual mode.
Command 00A5h
Length 1 byte Parameter
Value 3h
Status None
Reference •The related exposure commands which enable to set in manual exposure
mode, are Shutter Speed Assignment, AGC Gain Assignment and Iris
Assignment.
Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h A5h 33h EFh
Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value
Example: e0 e1
In case of No Error :
00000000B ⇒ 00h ⇒ 30h 30h
In case of Busy : 00010000B ⇒ 10h ⇒ 31h 30h
In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
Condition of Error flag to be set
Busy •In process of camera initializing operation by Camera Reset
command, etc.
•In status of AE Lock ON.
•In case of executing Preset Move command.
Mode Error •Not in status of Camera ON.
•Not in status of Host Control Mode.