Vaddio Canon VC-C50i Programmers - Manual (Page 71)

70
13.11 Zoom Stop
Camera Control Command Type 1
Function To stop zoom operation.
Command 00A2h
Length 1 byte Parameter
Value 0h
Status None
Reference •Flags in Zooming of Operation Status Request comes out zero.
•To set Zoom Stop by default at the moment of setting Camera Reset,
Camera ON command during power ON.
Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h A2h 30h EFh
Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
In case of No Error :
00000000B ⇒ 00h ⇒ 30h 30h
In case of Busy : 00010000B ⇒ 10h ⇒ 31h 30h
In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
Condition of Error flag to be set
Busy •In process of camera initializing operation by Camera Reset
command, etc.
•In case of executing Preset Move command.
Mode Error •Not in status of Camera ON.
•Not in status of Host Control Mode.