Vaddio Canon VC-C50i Programmers - Manual (Page 22)

21
11.2 Camera Control Command Table
Function Meaning Command Parameter Status Ref
Camera OFF To turn OFF power for Camera section 00A0h 0h None P 60
Camera ON To turn ON power for Camera section 00A0h 1h None P 61
Focus Auto To change mode of focus to AF 00A1h 0h None P 62
Focus Manual To stop and change of focus to Manual 00A1h 1h None P 63
Focus Near To move to near focus 00A1h 2h None P 64
Focus Far To move to far focus 00A1h 3h None P 65
Focus Position Assignment To move to focus position assigned 00B0h XXXXh *1 None P 66
Focus Position Request To return present focus position 00B1h 0h XXXXh *1 P 67
One Push AF After adjustment of focus, change to MF 00B1h 1h None P 68
Focus Range Request To return movable range of focus 00B1h 2h XXXXXXXXh *2 P 69
Zoom Stop To stop zoom operation 00A2h 0h None P 70
Zoom Wide To zooming to wide 00A2h 1h None P 71
Zoom Tele To zooming to tele 00A2h 2h None P 72
Zoom Hi Wide To zooming to wide high speed 00A2h 3h None P 73
Zoom Hi Tele To zooming to tele high speed 00A2h 4h None P 74
Zoom Position 1 Assignment To move to zoom position assigned 00A3h 00h~80h None P 75
Zoom Position 1 Request To return present zoom position 00A4h None 00h~80h P 76
Zoom Position 2 Assignment To move to zoom position assigned 00B3h 0000h~07A8h None P 77
Zoom Position 2 Request To return present zoom position 00B4h 0h 0000h~07A8h P 78
Zoom Speed Assignment To assign running speed of zoom 00B4h “31h”, 0h~7h None P 79
Zoom Speed Request To return present running speed 00B4h 2h 0h~7h P 80
Zoom Maximum Request To return maximum movable position 00B4h 3h 07A8h P 81
Backlight Compensation OFF To eliminate compensation of backlight 00A5h 0h None P 82
Backlight Compensation ON To compensate backlight 00A5h 1h None P 83
Exposure Auto To control exposure automatically 00A5h 2h None P 84
Exposure Manual To control exposure manually 00A5h 3h None P 85
AE Lock OFF To cancel AE lock ON 00A5h 40h None P 86
AE Lock ON To lock the exposure of AE mode 00A5h 41h None P 87
Shutter Speed Program To change shutter speed to program mode 00A8h 0h None P 88
Shutter Speed 1/60 (PAL: 1/50) To change shutter speed to 1/60 (PAL: 1/50) 00A8h 1h None P 89
Shutter Speed1/100 (PAL: 1/120) To change shutter speed to 1/100 (0PAL: 1/120) 00A8h 2h None P 90
Shutter Speed Assignment To assign shutter speed 00A5h
“35h”, 00h~1Bh
80h~83h
None P 91
Shutter Speed Request To return present shutter speed 00A5h 6h
00h~1Bh
80h~83h
P 92
AGC Gain Assignment To assign AGC Gain 00A5h “37h”, 00h~FFh None P 94
AGC Gain Request To return present AGC gain 00A5h 8h 00h~FFh P 95
Iris Assignment To assign iris 00A5h “39h”, 02h~11h None P 96
Iris Request To return iris value 00A5h “3Ah” 00h~12h P 97
AE Target Value Assignment To assign target value of AE brightness 00A5h “3Bh”, 10h~FFh None P 99
AE Target Value Request To return target value of AE brightness 00A5h “3Ch” 10h~FFh P 100
Auto White Balance Normal To adjust white balance automatically 00A7h 0h None P 101
Auto White Balance Lock To stop white balance control 00A7h 1h None P 102
White Balance Manual Mode To set white balance manually 00A7h 2h None P 103
White Balance Value Assignment To assign white balance manually 00A7h “34h”, 00h~FFh None P 104
White Balance Value Request To return present white balance manually 00A7h 5h 00h~FFh P 105
Fade Normal To fade out normal image slowly 00A9h 0h None P 106
Fade White To fade in white image slowly 00A9h 1h None P 107
Fade Hi Speed White To change to white image high speed 00A9h 2h None P 108
Fade Hi Speed Black To change to black image high speed 00A9h 3h None P 109
Camera Reset To reset Camera section 00AAh None None P 110
Zoom Ratio request To return zoom ratio of camera 00ABh None 10h P 111
Pixel Size Request To return CCD pixel size 00ACh None 14h P 112
Insertion of Infrared Cut Filter
Sets the status when infrared cut filter is
inserted
00B5h 1h None P 113
Settings when Infrared Cut Filter
Not Inserted Sets the status when infrared cut filter is not
inserted.
00B5h 0h None P 114
Infrared Cut Filter Status Request
Returns the setting status of the infrared cut
filter.
00B6h None 0h or 1h P 115
Electronic Zoom Setting
Sets the electronic zoom to the designated
magnification.
00B7h
2 byte
(magnification)
None P 116
Electronic Zoom Setting
Verification Returns the electronic zoom magnification that
was set.
00B8h None 00h~10h P 117