Vaddio Canon VC-C50i Programmers - Manual (Page 142)

141
14.15 Extended Operation Status Request
System Control Command Type 1
Function To return extended information of inside status of VC-C50i (operation status)
Command 0086h
Parameter 0h
Length 5
byte Status
Value Value of operation status which indicates inside status
(20 bits)
Reference The followings show status, in case that each bit is 1 among of status.
(MSB)
b19 In process of Menu
b18 Local Control Mode
b17 Time unset
b16 Date unset
b15 Not use
b14 Not use
b13 Exposure(AE) mode not AUTO
b12 White balance mode not AUTO
b11 Tilting under operation
b10 Tilt movable limit position
b9 Panning under operation
b8 Pan movable limit position
b7 Zooming under operation
b6 Remote Control operate OFF
b5 Camera Power OFF
b4 Unexecuting Pedestal Initialize
b3 Shutter speed flag 1
b2 Shutter speed flag 2
b3 b2 NTSC PAL
0 0 program program
0 1 1/60 1/50
1 0 1/100 1/120
1 1 Not use Not use
b1 Manual Focus mode
b0 Focusing under operation
(LSB)
•The information of b0 ~ b11 is equal to the information of 14.14 Operation
Status Request.
•In case that b19 is 1 (In process of Menu), unable to host control mode.
•In case that b18 is 1 (Local Control Mode), unable to control through host.
Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h 86h 30h EFh