WIKA CPC6000 - Manual (Page 11)

Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000 11
2. Safety Notices
2.1 User Responsibilities
To ensure safety, the user must make sure that:
The system is used properly, no dangerous media are used and that all technical specifications are
observed.
The system is operated in perfect operating condition.
This operation manual is legible and accessible to the user at the system’s location.
The system is operated, serviced and repaired only by authorized and qualified personnel.
The operator receives instruction on industrial safety and environmental protection, and is knowl-
edgeable of the operating instructions and the safety notices contained therein.
2.2. General Safety Notices
The system should only be operated by trained personnel who are familiar with
this manual and the operation of the instrument.
A condition for trouble-free and safe operation of this system is proper transport,
proper storage, installation, assembly and proper use as well as careful operation
and maintenace.
Any operation not described in the following instructions should be prohibited.
The system must be handled with care required for an electronic precision instru-
ment (protect from humidity, impacts, strong magnetic fields, static electricity and
extreme temperatures). Do not insert any objects into the instrument.
The system is powered via the power cable with a voltage that can cause physi-
cal injury. Even after disconnecting the system from the power supply, dangerous
voltages can temporarily occur due to capacitance.
Extreme care must be taken with pressure connections when using hazardous or
toxic media.
Repairs must only be performed by authorized service personnel.
Additional safety notices are found throughout this manual.
■
■
■
■
■
i
Notice
i
Notice
Warning
!
Warning
!
i
Notice
i
Notice