WIKA CPC6000 - Manual (Page 16)

Automated Pressure Calibrator
CPC 6000
16 Mensor/WIKA Operating Instructions - CPC 6000
Optional Display: The optional display is a window near the pressure label. This window can be set
up to be blank, or to display any one of the following:
Peak Pressure – minimum and maximum
Rate of change of a measured pressure
Barometer reading
Footer Keys: Like the top bar, the [Remote] and [Program] keys on the bottom left corner of the
display remain permanently on-screen. Touching either of these keys will cause that subject page to
appear in the display.
■
■
■