WIKA CPC6000 - Manual (Page 4)

Automated Pressure Calibrator
CPC 6000
4 Mensor/WIKA Operating Instructions - CPC 6000
6. Local Operation 29
6.1 General 29
6.2 Keys and Tabs 29
6.3 Display Screen Features 29
6.3.1 [Mensor] Logo 30
6.3.2 [Flag] Symbol 30
6.3.3 [>] and [<] Keys 31
6.3.4 Turndown Label and [Range Selector] Key 31
6.3.5 Pressure Label 32
6.3.6 Pressure [Units] Key 32
6.3.7 [Step Value] Key 33
6.3.8 Step Down [ ›] and Step Up [š] Keys 34
6.3.9 Control Pressure [Setpoint Value] 34
6.4 [Program] Key 35
6.4.1 Editing or Creating a Program 36
6.4.2 Running a Program 38
6.5 [Local] Label 39
6.6 [Setup] Key 39
6.6.1 [Channel] Setup 39
6.6.2 [Sensor] Setup 41
6.6.3 [Controller] Setup 41
6.7 Pump Regulator 42
6.8 Solenoid Valve Regulator 43
7. Remote Operation 45
7.1 Remote Setup 45
7.1.1 [Instrument] Setup Screen 45
7.1.2 [IEEE-488] Setup Screen 46
7.1.3 [Serial] Setup Screen 46
7.1.4 [Ethernet] Setup Screen 47
7.2 Ethernet Communication 47
7.3 IEEE-488 (GPIB) 47
7.3.1 Capability Codes 48
7.3.2 Interface Functions 48
7.4 RS-232 Serial Communication 48
7.4.1 Cable Requirements 48
7.4.2 Command and Query Format 49
7.4.3 Command Set Definitions 49
7.4.4 Output Formats 50
7.4.5 Commands and Queries 51
7.4.6 CPC 6000 Error Codes 58
7.4.7 Remote Emulation 60
7.4.7.1 PCS 400 Emulated Commands and Queries 60
7.4.7.2 PCS 200 Emulated Commands and Queries 61
7.4.7.3 SCPI Commands 63