WIKA CPC6000 - Manual (Page 86)

Automated Pressure Calibrator
CPC 6000
86 Mensor/WIKA Operating Instructions - CPC 6000
9.4 Spare Parts List
Table 9.4 lists the spare parts for the CPC 6000 that can be ordered from Mensor.
Table 9.4 – Spare Parts
Part Description Part Number
Operation Manual 0017222001
Fuses 4100111150
Power Cord 4000400002
Power Supply 0017589001
Fitting Adapter – 7/16-20 to 1/8 FNPT 6000602015
Fitting Adapter – 7/16-20 to 1/4 FNPT 0012688001
O-ring seals for 7/16-20 Fitting 4250010020
Power Module Assembly 0017203001
Motherboard 4904000059
Pneumatics Module – <15 psig 0017207001
Pneumatics Module – 0-150 0017560001
Pneumatics Module – 0-1500 0017560002
Pump Regulator Assy – <15 psi 0017213001
(MP SVR) Regulator Assy – 0-150 psi 0017562001
(HP SVR) Regulator Assy – 0-1500 psi 0017562002
(LP SVR) Regulator Assy – 0-50 psi 0017562003
Regulator Cap Assy – 0-150 psi 0017623001
Regulator Cap Assy – 0-1500 psi 0017623002
Solenoid Valve – Low <150 psi 6100300038
Solenoid Valve – Mid (150 to 1500) 6100300037
Pressure Transducer –
Primary or Secondary (Calibrated) 0017218XXX
Consult Mensor for specific ranges
Calibration Sled Kit 0017657001