WIKA CPC6000 User Manual
Page 77
Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000
77
9. Maintenance
The CPC 6000 was designed for maintenance-free operation. User maintenance is not recommended
beyond replacement of parts listed in Table 9.4. If you have questions not covered by this manual, call
1.800.984.4200 (USA only), or 1.512.396.4200 for assistance, or send an e-mail to tech.support@men-
sor.com.
9.1 Beyond the Warranty
Take advantage of Mensor’s expert product care. Mensor Corporation provides complete maintenance
and calibration services, available for a nominal fee. Our service staff is knowledgeable in the inner-
most details of all of our instruments. We maintain units that are in operation in many different indus-
tries and in a variety of applications, and by users with a wide range of requirements. Many of these
instruments have been in service for over twenty years, and continue to produce excellent results.
Returning your instrument to Mensor for service benefits you in several ways:
1.
Our extensive knowledge of the instrument assures you that it will receive expert care.
2.
In many cases we can economically upgrade an older instrument to the latest improvements.
3.
Servicing our own instruments which are used in “real world” applications keeps us informed as to
the most frequent services required. We use this knowledge in our continuing effort to design better
and more robust instruments.