WIKA CPC6000 User Manual
Page 54
Automated Pressure Calibrator
CPC 6000
54
Mensor/WIKA Operating Instructions - CPC 6000
59
Locale
{locale code}
Sets Language
and Country code.
Locale Code
en_us
en_ca
en_gb
fr_fr
fr_ca
es_es
es_mx
de_de
it_it
zh_cn
ko_ko
ru_ru
de_ch
fr_ch
en_ie
ja_jp
pl_pl
Language
english
english
english
french
french
spanish
spanish
german
italian
chinese
korean
russian
german
french
english
japanese
polish
Country
usa
canada
great brittain
france
canada
spain
mexico
germany
italy
china
korea
russia
switzerland
switzerland
ireland
japan
poland
60
Locale?
<sp>{string}<cr><lf>
Returns current language and Country locale.
61
Localgravity
{value}
Sets the acceleration of gravity in feet/sec^2.
62
Localgravity? <sp>{value}<cr><lf>
Returns the local gravity in feet/sec^2.
63
LowerLimit
Value inside primary trans-
ducer range on turndown #1
in current units.
Sets the lower control limit for the active chan-
nel.
64
LowerLimit?
<sp>{value}<cr><lf>
Returns the lower control limit for the active
channel.
65
Lowover-
shoot
{Yes or No}
Sets the active channel to low overshoot mode.
66
Lowover-
shoot?
<sp>{Yes or No}<cr><lf>
Returns the current setting of the lowovershoot
mode.
67
Measure
none
Instrument placed in Measure mode.
68
Measure?
<sp>{Yes or No}<cr><lf>
Returns YES if active channel is in Measure
mode; NO if otherwise.
69
Mode
{standby, measure,control,
vent}
Sets the operation mode of the active channel.
70
Mode?
<sp>{string}<cr><lf>
Returns the operation mode of the active chan-
nel.
71
Netmask
{nnn.nnn.nnn.nnn}
Sets the Ethernet network mask.
72
Netmask?
<sp>{nnn.nnn.nnn.
nnn}<cr><lf>
Returns the Ethernet network mask.
73
Outform
{1 to 8}
Sets the output format. See ‘Output Formats’ in
Section 4
, Remote Operation.
74
Outform?
<sp>{X}<cr><lf>
Returns the current output format.