WIKA CPC6000 - Manual (Page 12)

Automated Pressure Calibrator
CPC 6000
12 Mensor/WIKA Operating Instructions - CPC 6000
2.3 Warnings and Caution Notices
WARNING: HIGH PRESSURE! High pressure gases are potentially hazardous.
Energy stored in these gases can be released suddenly and with extreme force.
High pressure systems should be assembled and operated only by personnel who
have been trained in proper safety practices.
WARNING: POSSIBLE INJURY! The tubing, valves and other apparatus attached to
the gauge must be adequate for the maximum pressure which will be applied,
otherwise physical injury to the operator or bystanders is possible.
CAUTION: Use the proper pressure medium. Use only clean, dry, non-corrosive
gases. This instrument is not designed for oxygen use.
WARNING: HIGH SOUND LEVELS! Pressures from 600 psig and up can generate
sound levels above 100 db for brief periods when they are exhausted directly to
atmosphere. If no mufflinig devices are attached to the exhaust port, then ear
protection is advised for personnel in the vicinity of instruments that will be oper-
ated under such conditions.
WARNING: NOT EXPLOSION PROOF! installation of this instrument in an area
requiring devices rated as intrinsically safe is not recommened.
CAUTION: ESD PROTECTION REQUIRED. The proper use of grounded work
surfaces and personal wrist straps are required when coming into contact with
exposed circuits (printed circuit boards) to prevent static discharge damage to
sensitive electronic components.
Additional Warning and Caution notes are included throughout this manual.
Warning
!
Warning
!
Warning
!
Warning
!
!
Caution
!
Caution
Warning
!
Warning
!
Warning
!
Warning
!