WIKA CPC6000 User Manual
Page 7
Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000
7
1. General Information
1.1 Warranty
All products manufactured by Mensor® Corporation (Mensor) are warranted to be free of defects in
workmanship and materials for a period of one year from the date of shipment. No other express war-
ranty is given, and no affirmation of Seller, by words or actions, shall constitute a warranty. SELLER
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICU-
LAR PURPOSES WHATSOEVER. If any defect in workmanship or material should develop under
conditions of normal use and service within the warranty period, repairs will be made at no charge
to the original purchaser, upon delivery of the product(s) to the factory, shipping charges prepaid. If
inspection by Mensor or its authorized representative reveals that the product was damaged by ac-
cident, alteration, misuse, abuse, faulty installation or other causes beyond the control of Mensor, this
warranty does not apply. The judgment of Mensor will be final as to all matters concerning condition of
the product, the cause and nature of a defect, and the necessity or manner of repair. Service, repairs
or disassembly of the product in any manner, performed without specific factory permission, voids this
warranty.
MENSOR MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MANUAL, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Mensor shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
1.2 Important Notice
Please Note: The product specifications and other information contained in this manual are subject to
change without notice.
Mensor Corporation has made a concerted effort to provide complete and current information for the
proper use of the equipment. If there are questions regarding this manual or the proper use of the
equipment, contact Mensor Corporation at:
TEL
1.512.396.4200 WEB SITE
www.mensor.com
TEL
1.800.984.4200 (USA only)
E-MAIL [email protected]
FAX
1.512.396.1820 [email protected]
Any reproduction of this manual or parts thereof by any means is prohibited.
1.3 Compliance
This equipment has been tested and found to comply with the european EMC directive (2004/108/EC)
and FCC 47 CFR, Part 15, Subpart B Class A and the European Union Low Voltage Directive (73/23/
EEC). The standards used to demonstrate compliance to these directives are:
EN55022 1998, A1:2000,A2:2003
EN55024 1998, A1:2001, A2:2003
61000-3-2 2000, A2 2005
61000-3-3 1995, A1 2001
IEC 61010-1:2001