WIKA CPC6000 - Manual (Page 71)

Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000 71
8. Options
This section lists options available for the CPC 6000. Users might consider letting the factory install
a special feature not listed here. Mensor welcomes the opportunity to quote on such requests. The
cost of adding an enhancement frequently will amortize itself in a very short time because of improved
process efficiency.
8.1 Transport Case (PN 0011159001)
A wheeled transport case is available suitable for moving the CPC 6000 between sites, or as an air-
freight (or other) shipping container. The case is constructed of a high impact plastic with a black
exterior. It includes two keys, locks, a piano hinge, an anodized interlocking tongue and groove open-
ing, various nickel-chrome and stainless steel fixtures, a vinyl satchel style handle and a retractable
pull-out handle. The interior is filled with high density polyurethane foam with a die-cut cavity to cradle
the instrument with fitting adapters in place, and an additional cavity to store related accessories.
Rugged and weather resistant, the case makes an attractive, practical shipping and moving container.
The case weighs approximately 29 pounds (13.15 kg) unloaded, and can support a load of up to 150
pounds (68.04 kg). Nominal dimensions are 15 inches by 24 inches by 26 inches (38.10 cm x 60.96 cm
x 66.04).
Figure 8.1 - Transport Case
8.2 Rack Mount Kit
A rack mount kit allows the customer to in-
stall a CPC 6000 into a standard 19” instru-
ment rack. It includes pre-installed brackets
on the sides of the instrument as well as
spacer panels and hardware to rack mount
the CPC 6000.
Figure 8.2 - Rack Mount Kit