WIKA CPC6000 - Manual (Page 9)

Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000 9
1.6.2 Calibration Services
In addition to servicing our own products, Mensor provides complete pressure calibration services up
to 20,000 psi for many pressure instruments. This service includes a Certificate of Compliance and
Calibration and a record of traceability to the pressure standards of the United States National Institute
of Standards and Technology (NIST).
1.6.3 Accreditations
Mensor Corporation is registered to ISO 9001:2008. The calibration program at Mensor is accredited
by A2LA, as complying with both the ISO/IEC 17025:2005 and the ANSI/NCSL Z540-1-1994 stan-
dards.
1.7 Packaging for Shipment
If the product must be shipped to a different location or returned to Mensor for any reason through a
common carrier it must be packaged properly to minimize the risk of damage.
The recommended method of packing is to place the instrument in a container, surrounded on all
sides with at least four inches of shock attenuation material such as styrofoam peanuts.