JLG 1350SJP Service Manual - Manual (Page 104)

SECTION 3 - CHASSIS & TURNTABLE
3-58 – JLG Lift – 3121142
6. Loosen the M10x25 flathead socket screws and remove
the planetary ring without damaging the O-Ring.
7. Remove the release joint together with the spring.
8. Disassemble the Ø40 outer snap rings and using an
extractor remove the planetary gears from the spindle
pins.
9. Loosen the M6x6 socket headless screws and also
remove the 3/16" balls.
10. Loosen the ring nut using the special wrench.
11. Remove the hub support together with the roller bear-
ing inner track.