JLG 1350SJP Service Manual - Manual (Page 500)

SECTION 6 - JLG CONTROL SYSTEM
6-124 – JLG Lift – 3121142
CANBUS LINK FROM THE CHASSIS MODULE LOST
1. Position the Platform/Ground select switch to the
Ground position.
2. Plug the analyzer into the connector inside the Ground
control box.
3. Pull out the Emergency Stop switch.
4. The analyzer screen should read:
5. Press enter twice to reach Logged Help. The screen will
read:
6. Hit ESC to get back to the HELP screen and then use the
arrow button to reach VERSIONS. Hit Enter.