8 powertrack maintenance, One piece bracket maintenance, Powertrack maintenance -53 – JLG 1350SJP Service Manual User Manual
Page 287: One piece bracket maintenance -53
Advertising
SECTION 4 - BOOM & PLATFORM
3121142
– JLG Lift –
4-53
4.8
POWERTRACK MAINTENANCE
One Piece Bracket Maintenance
1.
Place the powertrack on a workbench.
2.
Remove the screws from the bars on one side of the
powertrack on the first link.
3.
Remove the screws from the flat bar on the other side of
the powertrack.
4.
Pull up on the loose side of the round bar to allow the
poly roller to slide off.
Advertising
This manual is related to the following products: