JLG 1350SJP Service Manual - Manual (Page 76)

SECTION 3 - CHASSIS & TURNTABLE
3-30 – JLG Lift – 3121142
13. Remove the disengagement shaft kit (15).
14. Place the disengagement shaft kit (15) inside the special
tool (6689960240).
15. Tighten the 2 screws M5x16, grade 8.8, of the cover by a
torque wrench to 18.4 ft.lbs. (25 Nm).
16. By using pliers remove the elastic ring (11) from the
splined shaft (14).
17. Remove the special tool and remove the spring (13) and
the washers (12).
18. Turn the gearbox upside down and unscrew the 2
screws M8x16 (4), grade 8.8, of the end cover (7).