JLG 1350SJP Service Manual - Manual (Page 75)

SECTION 3 - CHASSIS & TURNTABLE
3121142 – JLG Lift – 3-29
7. By using a puller remove, at the same time, the brake
piston (44), the spacer (39) and the brake shaft (35).
8. Remove the spacer (39) from the brake piston (44).
9. Remove the internal O-Ring seal (41) and the backup
ring (40) from their seat in the spacer (39).
10. Remove the external O-Ring seal (38) and the backup
ring (37) from their seat in the spacer (39).
11. Remove the O-ring seal (42) and the backup ring (43)
from their seats in the flanged hub (31).
12. Remove brake discs pack (32-33).