JLG 1350SJP Service Manual - Manual (Page 400)

SECTION 6 - JLG CONTROL SYSTEM
6-24 – JLG Lift – 3121142
SWING: ACCEL X.Xs Displays/adjusts swing acceleration 0.1 to 5.0 sec 2.0 2.0
DECEL X.Xs Displays/adjusts swing deceleration 0.1 to 3.0 sec 1.5 1.5
MIN LEFT XX% Displays/adjusts minimum swing left speed 0 to 50% 40 40
MAX LEFT XXX% Displays/adjusts maximum swing left speed 0 to 100% 65 65 115-125 115-125
MIN RIGHT XX% Displays/adjusts minimum swing right speed 0 to 50% 40 40
MAX RIGHT XXX% Displays/adjusts maximum swing right speed 0 to 100% 65 65 115-125 115-125
CREEP LEFT XX% Displays/adjusts maximum swing left speed
NOTE: used when creep switch on pump pot is
active 0 to 65% 50 50
CREEP RIGHT XX% Displays/adjusts maximum swing right speed
NOTE: used when creep switch on pump pot is
active 0 to 65% 50 50
MAIN TELESCOPE: ACCEL X.Xs Displays/adjusts main telescope acceleration 0.1 to 5.0 sec 1.5 1.5
DECEL X.Xs Displays/adjusts main telescope deceleration 0.1 to 3.0 sec 1.0 1.0
MIN IN XX% Displays/adjusts minimum main telescope in
speed. Same as Creep speed 0 to 65% 15 15
MAX IN XXX% Displays/adjusts maximum main telescope in
speed 0 to 100% 65 65 58-68 65-75
MIN OUT XX% Displays/adjusts minimum main telescope out
speed. Same as Creep speed 0 to 65% 15 15
MAX OUT XXX% Displays/adjusts maximum main telescope out
speed 0 to 100% 60 60 45-55 50-60
BASKET LEVEL: ACCEL X.Xs Displays/adjusts basket level acceleration 0.1 to 5.0 sec 1.5 1.5
DECEL X.Xs Displays/adjusts basket level deceleration 0.1 to 3.0 sec 0.5 0.5
MIN UP XX% Displays/adjusts minimum basket level up
speed. Same as Creep speed 0 to 65% 40 40
MAX UP XXX% Displays/adjusts maximum basket level up
speed 0 to 100% 70 70
MIN DOWN XX% Displays/adjusts minimum basket level down
speed. Same as Creep speed 0 to 65% 40 40
MAX DOWN XXX% Displays/adjusts maximum basket level down
speed 0 to 100% 70 70
Table 6-3. Personality Ranges/Defaults
SUBMENU
(DISPLAYED ON
ANALYZER 1ST LINE)
PARAMETER
(DISPLAYED ON ANALYZER 2
ND
LINE)
DESCRIPTION RANGE
DEFAULT VALUES
TIME RANGE (SEC) (SEE
SECTION 6.10 FOR
MACHINE ORIENTATION
WHEN SETTING SPEEDS)
1200 1350 1200S 1350S