JLG 1350SJP Service Manual - Manual (Page 108)

SECTION 3 - CHASSIS & TURNTABLE
3-62 – JLG Lift – 3121142
dle pins. Lock with a ÿ40 outer snap ring. Lubricate the
bearings.
14. Using a marking pen, make a mark between the snap
ring and the bearing. Fit the greased spring and the
release joint. Use grease to fit the O-Ring 2-275 in the
hub support seat.
15. Place the hub onto the support making the two holes
coincide for tightening the M10x25 flathead socket
screws at the torque of 5daNm.
16. Fit the reduction gears and the pinion in the unit.