Boom sensor calibration position 3 -73 – JLG 1350SJP Service Manual User Manual
Page 449
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121142
– JLG Lift –
6-73
25.
Swing 180 degrees (centered over opposite end of chas-
sis) for Calibration Position 3.
When the machine is in the proper position, hit Enter.
The screen will read:
When Position 3 calibrating is complete the screen will
read:
Figure 6-16. Boom Sensor Calibration Position 3
Advertising
This manual is related to the following products: