Boom sensor calibration position 8 -77 – JLG 1350SJP Service Manual User Manual
Page 453
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121142
– JLG Lift –
6-77
When Position 7 Calibrating is complete, the screen will
read:
Press Enter. The screen will read:
30.
Lift until the function stops (controller will stop at 5
degrees above horizontal) for Calibration Position 8.
When the machine is in the proper position, hit Enter.
The screen will read:
Figure 6-21. Boom Sensor Calibration Position 8
Advertising
This manual is related to the following products: