Boom sensor calibration position 4 -74 – JLG 1350SJP Service Manual User Manual
Page 450
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-74
– JLG Lift –
3121142
26.
Press Enter. The screen will read:
Swing the machine back 180 degrees (centered over
original end of chassis) for Calibration Position 4.
When the machine is in the proper position, hit Enter.
The screen will read:
When Position 4 calibrating is complete, the screen will
read:
Figure 6-17. Boom Sensor Calibration Position 4
Advertising
This manual is related to the following products: