JLG 1350SJP Service Manual - Manual (Page 84)

SECTION 3 - CHASSIS & TURNTABLE
3-38 – JLG Lift – 3121142
13. Assemble correctly the spacers (21) on the pins of the
flanged hub (31).
14. Place the 5 planet assemblies of the 3rd reduction (20) in
the flanged hub's pin (31).
15. By using a rubber hammer and a metal stopper push the
planet assemblies of the 3rd reduction (20) against the
shoulder until assembly is complete.
16. By using pliers, assemble the circlips (19) in the flanged
hub pin seats (31).
17. Assemble the 2nd reduction assembly (18).
18. Insert the 2nd stage sun gear (17).