JLG 1350SJP Service Manual User Manual

Page 394

Advertising
background image

SECTION 6 - JLG CONTROL SYSTEM

6-18

– JLG Lift –

3121142

GLOW PLUG:
5

0

1

2

NO GLOW PLUGS: No glow plugs installed.

AIR INTAKE: Glow plugs installed in the air intake on the manifold.

IN-CYLINDER: Glow plugs installed in each cylinder.

2

STARTER LOCKOUT:
6

0

1

DISABLED: Automatic pre-glow time determined by ambient air temperature; engine start
can be attempted at any time during pre-glow.

ENABLED: Automatic pre-glow time determined by ambient air temperature; engine start is NOT permit-
ted until pre-glow is finished.

0

ENGINE SHUTDOWN:
7

0

1

DISABLED: No engine shutdown.

ENABLED: Shutdown engine when coolant temperature is greater than 110 deg. C or the oil
pressure is less than 8 PSI.

1

TILT:
8

1

2

3

4

5

5 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more
than 5 degrees and above elevation; also reduces drive speed to creep.

4 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 4 degrees
and above elevation; also reduces drive speed to creep.

3 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 3 degrees
and above elevation; also reduces drive speed to creep.

4 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.

3 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 3
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.

1

Note: Any of the selections above will light the tilt lamp when a tilted condition occurs and will sound the platform alarm when the machine is also above elevation.

SOFT TOUCH:
9

0

1

NO: No soft touch system installed.

YES: Soft touch system installed.

0

Table 6-2. Machine Configuration Programming Information - Version P7.X to Present

Configuration Digit

Number

Description

Default

Number

Advertising
This manual is related to the following products: