JLG 1350SJP Service Manual - Manual (Page 70)

SECTION 3 - CHASSIS & TURNTABLE
3-24 – JLG Lift – 3121142
THE MAX WHEEL SPEED WITH DISENGAGED GEARBOX MUST NOT EXCEED 25
REV/MIN.
1. Unscrew the 2 socket head screws M8x16 (4), grade 8.8,
of the end cover (7) with a male hex head wrench.
2. Rotate the cap nut (5).
3. Take out the cap nut (5).
4. Turn the cap nut (5) upside down. As result the pin (3)
will be pushed inside in order to permit disengagement
of the gearbox.
5. Rotate the cap nut (5).
Figure 3-17. Gearbox engaged