JLG 1350SJP Service Manual User Manual
Page 440
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-64
– JLG Lift –
3121142
10.
Hit Enter. The screen will read:
11.
Hit enter again. The screen will read:
12.
Activate the Tele Out function until the boom starts to
move, then leave off immediately. The display will read
CRK PT = and show the numeric crack point value.
13.
Hit enter. The number displayed will be the value that
the crack point is set to. The screen will show:
14.
Hit Enter. The screen will read:
Advertising
This manual is related to the following products: