Lenze E94AYCEC - Manual (Page 37)

Lenze · E94AYCEC Communication module (POWERLINK CN) · Communication Manual · DMS 3.0 EN · 08/2014 · TD17
37
6 Commissioning
6.3 Settings and displays in the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3 Settings and displays in the »Engineer«
Setting / display Description
General General information on the node type or the synchronisation of the
application
EPL address (project) Setting of the POWERLINK address (node ID: C13044 / C14044 )
You can set the address ’1’ ... ’100’ for the communication module.
Current EPL device address Display of the current POWERLINK device address ( C13042 / C14042 )
EPL host name The DNS-compatible host name ( C13045 / C14045 ) has to be non-
ambiguous within the network domain.
The device name ...
• consists of max. 15 characters ([A ... Z], [a ... z], [0 ... 9], [ - ]);
• starts with a letter;
• ends with a letter or a digit.
EPL IP address The IP address ( C13000 / C14000 ) is created from the POWERLINK address
(Node ID): 192.168.100.[ C13044 / C14044 ]
Example: 192.168.100.1 = 0xC0.A8.64.01
EPL MAC address Display of the MAC address ( C13004 / C14004 )
Open/close advanced
settings
Here, the POWERLINK communication can be reset.