Response code – Rockwell Automation 900 Temperature Controller Communications Functions - Series B User Manual
Page 25
Advertising
Publication 900-UM004D-EN-E - July 2010
Bulletin 900 Communications Procedures 900-TCx (CompoWay/F)
2-9
Response code
Normal Completion
Error Occurred
Table 2.8
Response
Code
Name
Description
0000
Normal completion
No errors were found.
Table 2.9
Response
Code
Error Name
Cause
1001
Command too long
The command is too long.
1002
Command too short
The command is too short.
1101
Area type error
The variable type is wrong.
1103
Start address out-of-range error The read start address is out of range.
110B
Response too long
The number of elements exceeds the
maximum/
1100
Parameter error
The bit position not 00.
2203
Operation error
EEPROM error
ATTENTION
!
Alarm function:
Even though alarms are not displayed on the controller's
display, they function normally in communications.
Advertising