Rockwell Automation 900 Temperature Controller Communications Functions - Series B - Manual (Page 34)

Publication 900-UM004D-EN-E - July 2010
2-18 Bulletin 900 Communications Procedures 900-TCx (CompoWay/F)
Service Response PDU
Test data
Set any test data within the range 0…200 bytes of user-defined test data.
Set a value for the test data within the ranges shown below according to
the communications data length.
Do not set H’40. Doing so results in no response.
Response code
Normal Completion
Error Occurred
Table 2.24
Communications Data Length Test Data
8 bits ASCII data: H’20 to H’7E, or H’A1 to H’FE
7 bits ASCII data: H’20 to H’7E
Table 2.25
Response Code Name Description
0000 Normal completion No errors were found.
Table 2.26
Response Code Name Description
1001 Command too long The command is too long.
2203 Operation error EEPROM error.
MRC SRC Response
Code
Test Data
0 to 200
0 8 0 1
2 2