Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 103)

Publication 1756-UM534B-EN-P - November 2010 103
Monitor Remote I/O Chapter 5
Data can be displayed in the following formats.
Hexadecimal
You can display discrete I/O data in hexadecimal (0000…FFFF) format from
the View menu, and choosing Hex, or by clicking the Display Hex button on
the toolbar.
Signed Decimal
You can display discrete I/O data in signed decimal (-32768…32767) format
by choosing the View menu, and choosing Signed from the pull-down menu,
or by clicking the Signed button on the toolbar.
Format From menu From Toolbar
Hexadecimal View/Hex 0x button
Signed decimal View/Unsigned 1 button
Unsigned decimal View/Signed -1 button
Main Menu Toolbar
Main Menu Toolbar