Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 44)

44 Publication 1756-UM534B-EN-P - November 2010
Chapter 2 Configure Scanner Mode
Matching Configuration Tool Settings with Module Settings
After manually adding a rack, a download is necessary.
To download to the module, from the Configure menu, select Download
Configuration; or, from the toolbar, click the Download Config to Module
button.
Manually adding racks also requires the discrete data to be mapped to tags in
the ControlLogix controller before allowing a download. The data can be
mapped automatically or manually.
See Map I/O Data on page 51 .
Main Menu
Toolbar