Add the 1756-rio module – Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual User Manual
Page 24
Advertising
![background image](/manuals/579898/24/background.png)
24
Publication 1756-UM534B-EN-P - November 2010
Chapter 1 The 1756-RIO Module-Getting Started
Add the 1756-RIO Module
1. On the Controller Organizer, right-click on the I/O Configuration
folder and select New Module from the pull-down menu.
2. On the Select Module dialog box, expand the Communications tab and
select the 1756-RIO module.
3. Click OK.
The 1756-RIO Module Properties dialog box displays.
IMPORTANT
You must be offline to add the module to the I/O configuration
in the RSLogix 5000 project.
Advertising