Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 104)

104 Publication 1756-UM534B-EN-P - November 2010
Chapter 5 Monitor Remote I/O
Unsigned Decimal
You can display discrete I/O data in Unsigned Decimal (0…65535) format
from the View menu, and choosing Unsigned, or by clicking the Unsigned
button on the toolbar.
Monitor Discrete Outputs in Scanner Mode
To monitor discrete outputs in scanner mode, follow these steps.
1. On the main menu of the configuration tool, from the Monitor pull-
down menu, select Monitor Discrete Outputs.
2. Right-click on a rack and select Monitor Discrete Outputs.
3. Use the Monitor Discrete Outputs button on the toolbar.
Main Menu Toolbar
Main Menu Rack
Toolbar