Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 66)

66 Publication 1756-UM534B-EN-P - November 2010
Chapter 3 Configure Adapter Mode
4. On the 56RioCfgAdpt dialog box, from the Configure menu, choose
Autoconfigure to build a configuration from observed network traffic,
or click the Autoconfigure button on the toolbar.
The RSLinx Path Selection autobrowse dialog box displays.
5. Navigate to the backplane and select the 1756-RIO adapter module and
click OK.
The 1756-RIO module builds a configuration based on what it has observed
on the Remote I/O network since the download. The configuration includes
racks, block transfer modules, and observed block transfer updates. All block
transfers are set to type BT-MODULE.
Main Menu Toolbar