Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 95)

Publication 1756-UM534B-EN-P - November 2010 95
Link Module Configuration with RSLogix 5000 Project Chapter 4
Archive Template Check Command
The Archive Template Check command checks and confirms any block
transfer module templates used in the current configuration file are stored in
the directory where the configuration is stored.
1. To use the Archive Template Check command, from the File menu,
choose Archive Template Check.
2. When the confirmation dialog box appears, click OK.
You must make sure you save your project if you want to keep a backup copy,
otherwise, you get an error that the active project has not been saved, or the
BT Template File is not found.
See Appendix C for additional information on templates.