Monitor block transfers in adapter mode – Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual User Manual
Page 112
Advertising
112
Publication 1756-UM534B-EN-P - November 2010
Chapter 5 Monitor Remote I/O
Monitor Block Transfers in Adapter Mode
To monitor a block transfer module, right-click on the module in the I/O tree
and select Monitor BT Module from the pull-down menu.
The BTMon, or block transfer module window displays.
ATTENTION
You must set the RSLinx communication path to start the
BTMon utility.
Block Transfer Read
Block Transfer Write
Advertising