Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual User Manual
Page 74
Advertising
74
Publication 1756-UM534B-EN-P - November 2010
Chapter 3 Configure Adapter Mode
From the BTR Len and BTW Len pull-down menus, select the desired
lengths. The BTR Length and BTW Length sizes are determined by the
remote I/O scanner and must match the remote I/O scanner’s
configuration.
2. Click OK.
Monitored Racks
1. On the I/O Module Properties dialog box, from the Module Type pull-
down, select the block transfer module type.
Advertising